How to choose an infrared sauna for your home
Choose an infrared sauna for home by checking its footprint, usable seating, electrical requirements and approved installation location before comparing extras. This guide explains those decisions using two real cabin layouts, so you can shortlist equipment that fits your home rather than redesign your room around a purchase.
- Choose an infrared sauna for home by fit, seating and verified installation requirements—not the longest feature list.
- Madrid Elite offers three-person capacity; the corner model prioritizes a two-person corner layout.
- A 120 V listing alone does not confirm compatibility with your household circuit.
- Resolve unclear electrical and outdoor-use specifications before ordering.
How do you choose an infrared sauna for your home?
Start with your room, then compare the home sauna collection against your measurements. A photograph shows the style; it cannot confirm doorway clearance, a comfortable seat or an appropriate electrical supply.
Aurevia Wellness’s infrared sauna selection suits homeowners comparing cabin layouts and practical specifications for a private home retreat. Use the following sequence to turn a broad search into a defensible shortlist.
- Measure the proposed location, access route and space needed to open the door.
- Decide who will use the sauna together and compare usable bench dimensions.
- Confirm the model’s electrical requirements against its manual and rating plate.
- Check heating layout, controls and the documented operating limits.
- Resolve installation, warranty and delivery questions before ordering.
For a 2026 purchase, keep a dated copy of the specifications you used. A product name or attractive room photograph is not a substitute for the instructions supplied with the equipment.
Why fit matters more than the feature list
An at-home retreat should feel considered, not squeezed into a spare corner. Position the cabin so entering, sitting and leaving remain straightforward, and leave the service and ventilation space the manufacturer requires.
The practical distinction is between the cabinet’s measurements and the room it needs. Door movement, assembly access and maintenance all sit outside the headline footprint. Do not assume a wall-to-wall fit is an acceptable installation.
Treat seating the same way. A stated occupancy describes capacity, not your preferred posture. If your routine involves sharing the cabin, compare the bench layout before choosing between two- and three-person models.
Compare two infrared sauna layouts at a glance
The following specifications come from Aurevia Wellness product listings reviewed on November 9, 2026. They are listed specifications, not independent performance-test results.
| Model | Best for | Listed size and power | Useful features | Limitation to resolve |
|---|---|---|---|---|
| Madrid Elite 3-Person Low-EMF Infrared Sauna | A shared routine in a rectangular cabin | 42 × 60 × 75 inches; 1.76 kW; 420 pounds | Seven far infrared carbon heating panels, removable bench, interior and exterior controls | Confirm usable bench dimensions and the exact circuit requirement; neither follows from capacity alone |
| 2-Person Corner Far Infrared Sauna – Hemlock Wood, Glass Front | A two-person routine with a corner-shaped layout | 47.24 × 47.24 × 76.38 inches; 1.52 kW; 330 pounds | Seven heating panels, glass front, touch and app controls | Listing says not waterproof; confirm electrical frequency and plug specification before ordering |
Choose the layout first, then verify the installation details. Neither cabin is automatically the right choice because it has more seats, more glass or a higher power rating.
Madrid Elite: best for a shared rectangular layout
The Madrid Elite listing specifies Canadian Hemlock construction and a removable bench. Its seven far infrared carbon heating panels and interior and exterior controls provide concrete features to compare with another model, rather than relying on a general luxury label.
The trade-off is its installation envelope. A 60-inch cabinet dimension and a listed weight of 420 pounds require a realistic access and placement plan. Confirm which dimension runs along your intended wall using the assembly drawing, not the order of numbers in a product summary.
Ask for a bench drawing if seating comfort is decisive. A three-person capacity does not establish room for three adults in every posture, and a removable bench does not prove that the cabin supports your preferred stretching position.
Two-person corner model: best for a corner-shaped plan
The corner model pairs a glass front with Canadian Hemlock construction and multiple control options. Its listed outer dimensions are 47.24 × 47.24 × 76.38 inches, but a corner-shaped front still needs a proper floor-plan drawing to show the door path and usable interior.
The important limitation is explicit: the listing says it is not waterproof. Although the product description also discusses sheltered outdoor placement, that wording does not establish suitability for rain, humidity or your particular climate. Obtain written installation guidance before selecting an outdoor location.
Its electrical listing includes 120 V and a 50 Hz entry. Ask for confirmation of the supplied US unit’s frequency, plug and circuit requirements before purchase. Do not resolve inconsistent specifications by choosing whichever line looks convenient.
Measure the room and the delivery route separately
Write down the finished cabin measurements, then walk the delivery route. Check door openings, hallway turns, stairs and the final room entrance. Ask whether the equipment arrives assembled or as separate panels, and obtain the packaged dimensions relevant to your order.
For each shortlisted model, record:
- External width, depth and height, with a drawing showing orientation.
- Door movement and the clear space needed to enter.
- Manufacturer-required assembly and service clearances.
- Package sizes, weights and the proposed delivery route.
- Floor suitability for the cabin and its occupants.
A basement, upper floor or converted room deserves particular attention because moving the packages and supporting the finished installation are separate questions. Where floor capacity is uncertain, seek a qualified assessment rather than treating the product weight as the complete load.
Do not borrow a clearance figure from a different sauna. The right number is the one specified for the exact unit you order.
Verify electrical requirements before choosing the location
Power rating and supply requirements answer different questions. The Madrid Elite is listed at 1.76 kW; the corner model is listed at 1.52 kW. Those figures describe rated power, not permission to use any nearby outlet.
Ask for the installation manual and a clear rating-plate image. Give a licensed electrician the required voltage, frequency, current, plug type and circuit instructions, along with the intended location.
Check these details together:
- The requirements of the supplied US model, not a generic international specification.
- Whether the manufacturer requires a dedicated circuit.
- The permitted outlet position and supplied cable arrangement.
- Any restrictions on extension cords, adapters or installation locations.
- The work needed before delivery and assembly.
Do not plan a purchase around an improvised electrical workaround. Confirm the installation first; accessories and lighting can wait.
Compare the heating layout, not just the heater count
Both example cabins list seven heating panels, but an equal count does not establish equal coverage or heat distribution. Panel placement, seating position and the cabin’s geometry are separate things to inspect.
Request an interior drawing or clear interior photographs. Look at where the panels sit relative to your back, legs and usual seated position, and check whether the manufacturer restricts proximity to them.
For 2026 comparisons, keep maximum temperature separate from the temperature you intend to use. The Madrid Elite listing specifies a maximum of 135°F; that is a product specification, not a recommended setting for every user or a promise about warm-up time.
Treat “low-EMF” wording as a claim to verify through a measurement report. Ask where measurements were taken, under what operating conditions and by whom. A phrase in a product title is not an independent safety certification or evidence of a particular health outcome.
What makes infrared sauna choices vary?
The useful differences are specific to the room and the person buying. Compare the following before deciding whether an extra feature earns its place:
- Cabin shape: rectangular and corner layouts use wall space differently.
- Seating arrangement: occupancy labels do not replace bench measurements.
- Electrical needs: the supplied unit must suit a verified installation.
- Operating environment: indoor and sheltered-outdoor descriptions need model-specific limits.
- Controls and access: switches, door handles and displays should suit your routine.
- Support documentation: installation instructions and warranty terms should be available before ordering.
Materials and glass design also influence how a cabin looks in your home. Compare actual photographs with the written specification, and ask about any mismatch in finish or configuration before you commit.
Bluetooth audio, app control and lighting are secondary decisions. They add convenience only after the cabin passes the fit, seating and installation checks.
Can you put an infrared sauna outdoors?
Only choose outdoor placement when the manufacturer confirms that the specific model and installation arrangement are suitable. A covered patio is not automatically equivalent to a documented outdoor installation.
Aurevia Wellness’s two example listings recommend a covered or sheltered location when used outdoors, while the corner model is also marked not waterproof. Request guidance addressing your proposed exposure and local conditions rather than treating those statements as blanket permission.
For a separate comparison of outdoor cabin options, use the existing outdoor guide in the related reading below. Do not carry assumptions from a traditional outdoor sauna kit across to an infrared cabin.
Does a higher power rating make a sauna better?
A higher power rating does not, by itself, establish better comfort or a better fit. Compare rated power alongside cabin size, heater placement and the manufacturer’s operating instructions.
The 1.76 kW Madrid Elite and 1.52 kW corner model have different layouts and capacities. Those two figures alone cannot establish which warms faster in your room, feels more comfortable or uses less electricity over your chosen routine.
What should you confirm before ordering in 2026?
Keep a short written record for your final choice. The best buying checklist connects each attractive feature to a specification or an instruction you can actually verify.
Confirm the exact model, supplied electrical configuration, dimensions, seating arrangement and approved location. Then review delivery arrangements, assembly responsibilities, warranty coverage and return requirements for that order.
Aurevia Wellness lists the two cabins below as options for different layouts. Keep either on your shortlist only when the installation questions are resolved; wait if a critical specification remains unclear.
FAQ
What should I check first when choosing an infrared sauna for home?
Check the cabin’s dimensions, seating arrangement, electrical requirements and approved installation location first. Compare lighting, audio and app controls only after those requirements fit your home.
Is a two-person sauna always smaller than a three-person sauna?
Capacity alone does not establish the footprint. Compare the actual cabinet drawing, bench measurements and door-opening space for each model.
Will a 120 V infrared sauna work with my existing outlet?
A 120 V specification alone does not confirm compatibility. Check the supplied unit’s manual, frequency, plug and circuit requirements with a licensed electrician.
Can I place an infrared sauna under a covered patio?
Use a covered patio only when the manufacturer confirms the exact model and installation are suitable. Shelter does not establish waterproofing or suitability for every climate.
Does a low-EMF label prove that a sauna is safer?
The label alone does not establish a safety advantage. Request a measurement report with test conditions and check any claimed certification separately.
Should I choose the sauna with the most heating panels?
Choose by documented panel placement and cabin suitability, not count alone. Both example cabins list seven panels, but their layouts and capacities differ.
Can a sauna buying guide tell me the right temperature for my health?
A buying guide cannot provide a personal treatment plan. Follow the equipment instructions and seek medical advice about health conditions, medicines or concerns affecting heat exposure.
One last thing
Before buying an infrared sauna in 2026, mark its outline on the floor and stand where the open door will be. A cabin that looks ideal in a photograph can still interrupt how you move through the room.
Choose the cabin that works with your home, not the room you imagine rebuilding around it. Keep the shortlist narrow, resolve unclear specifications and let the everyday fit decide.
